top of page

MANUFACTURED FOR COMMERCIAL USE, SQBOARD Eco IS AN INTELLIGENT SOLUTION FOR BOTH INTERNAL AND EXTERNAL BUILDING APPLICATIONS.

Manufactured to ISO9001:2015 & EN12467:2012 Standards.

SQBOARD Eco IS A STRONG, IMPACT-RESISTANT, WATER RESISTANT

& FIRE RESISTANT MINERAL-BASED CONSTRUCTION PRODUCT. 

The Product

 

The SQBOARD Eco

The SQBOARD Eco is smooth surfaced, non-combustible, inert and water resistant. It can be used in most applications to replace and improve upon the results of wood, gypsum and cement based construction boards. 

 

RAW MATERIALS 

SQBoard Eco's principle raw material is Magnesium Oxide. The board is fiber reinforced. 

 

SPECIFICATIONS

SQBoard Eco’s standard dimensions are 1,200mm x 2,400mm. SQBoard Eco is supplied in a range of thicknesses from 6mm to 20mm and manufactured to EN12467:2012

INTERNAL APPLICATIONS

  • Wall Board 

  • Backing Board 

  • Ceiling 

  • Flooring 

  • Acoustic Protection 

  • Kitchen Furniture 

  • Wet (Bathrooms, Kitchens, Basements)

 

EXTERNAL APPLICATIONS

  • External Cladding 

  • Racking 

  • Forming 

  • Shuttering 

  • Sound Barrier 

  • Construction Sites 

  • Advertising 

  • Hoarding 

  • Complete External Wall Systems

 

OTHER APPLICATIONS

  • Aviation

  • Pallets

  • Lining

  • Maritime

  • Frames and Partitioning

  • Oil & Gas

  • Security and Defence

STORAGE & HANDLING 

Even though SQBoard Eco is not affected by water, insects or fire, we recommend that you store SQBoard Eco MgO in a dry, covered area not allowing the product to bow, or sit direct on the ground. Use standard wood working equipment when trimming or cutting to size; circular saw or jig saw or a quick score and snap using a carbide blade scoring knife (depending on thickness of the board). Very comparable handling to drywall or cement based boards without the concern for silicosis.

 

FASTENING

Nails and screws must be corrosion-resistant, galvanized, or stainless steel self tapping cement screws. SQBoard Eco recommends the use of quality, hot-dipped galvanized nails. Screw fasteners for the installation of SQBoard Eco shall be corrosion-resistant, self-drilling, self-tapping screws.  SQBoard Eco can be hand nailed or fastened with pneumatic tools to help control the depth that the nail is driven down.

 

Comparison Chart

Comparison of our standard construction board to other common used products.

FINISHING 

  • Patching — Dents and chips can be filled with a cementitious patching   compound or elastomeric filler. 

  • Caulking — A high quality, paintable caulk is recommended. For best results, use caulks that comply with either ASTM C834 or ASTM C920. Caulking should be applied in accordance with caulking manufacturers’ written instructions.

  • Painting — For best results, SQBoard Eco should be primed first and then painted with 100% acrylic topcoat(s). Multiple topcoats will extend the life of the painted surface and the board.

SQ

Board

Common uses for SQBoard.

Screwquick's SQ Board has a range of specialised key features for a variety of applications, a few are listed below;

SQ Eco Board: Giving fireproof, waterproof, thermal and acoustic qualities and meets our rigid standards, SQ Board is manufactured with both the SIPs and TF industries in mind. SQ Board covers a range of specialised applications and has been specifically engineered for particular applications. For a data sheet on SQ Board click here

SQ Board for General Construction: Our general all purpose board has superb fireproof, waterproof, thermal and acoustic qualities and meets rigid standards.

SQ Board for Clean Care applications (Previously MFR Mould and fungal resistant): SQ Boards are inert and Mould and Fungal Resistant. The product has been specifically designed to replace and improve upon results of existing products ideally suited for use where cleanliness is of the essence, for example in kitchen or medical environments.

 

SQ Board for Premium Fire applications: SQ Boards are inert, class A1 non-combustible fire resistant and produce zero smoke and zero spread of flame. The SQ Board is a class 0 building product and can withstand constant exposure to high temperatures.  SQ Board can be used in most fire applications to replace and indeed improve upon the results of existing products.

 

SQ Board for Acoustics: SQ Board provides superior acoustic reduction properties and can be used to replace and indeed improve the results of existing construction products, it is a perfect choice if noise pollution or noise transfer is of a concern.

 

SQ Board for Marine applications : SQ Board is inert, retains it's integrity in water and is water resistant, it is a designed to be used where the board would come in contact with water constantly or extremely regularly. It can be used in most wet applications to replace and improve upon the results of existing construction products 

 

We are in the process of implementing a data tag system which will allow board type identification post installation and finish.

 

For a full list of available downloads click here

 

 

 

 

bottom of page